No one wants to deal with a clogged toilet, but it happens. If you find yourself with a clogged toilet in Salt Lake City, Utah, there are some things you can do to safely and quickly unclog it.
The first thing you want to do is to make sure that you have the proper tools. You will need a plunger and a pair of rubber gloves. When you are ready, put on the rubber gloves and place the plunger over the hole in the toilet. You will want to make sure that the plunger is covering the hole completely. If it is not, the suction will not be strong enough to dislodge the clog.
Now, it is time to start plunging. You will want to use a steady up and down motion. Be sure to put your weight into it. After a few minutes, you should start to feel the suction break the clog. Once the clog is broken, you can remove the plunger and flush the toilet.
Using Baking Soda and Vinegar to Clear a Clogged Toilet
If plunging does not fix the clogged toilet, you may want to try using a combination of baking soda and vinegar. To use this method, you will need a cup of baking soda and a half cup of vinegar. Start by pouring the baking soda into the toilet bowl. Then add the vinegar and let the combination sit for 15 minutes. After the baking soda and vinegar sit for 15 minutes, you can use a plunger and try to unclog the toilet again.
If you are still unsuccessful, it may be because the clog is too deep. In that case, you will need to call in a Salt Lake City, Utah professional plumber. An experienced plumber has the right tools and know-how to safely clear the clog and restore your toilet back to working order.
1. The first thing you need to do is turn off the water to the toilet. This will help prevent any further messes.
Before you can begin the unclogging process, you must first turn the water to the toilet off. To do this, you will need to locate the shut-off valve under the toilet. Once you find the valve, turn it off and flush the toilet to empty the bowl of water. Then you will be able to use the plunger or pour the baking soda and vinegar solution into the bowl for unclogging. Turning off the water will prevent any further messes from occurring should the unclogging process fail.
2. Next, you need to remove the toilet tank lid and flush the toilet. This will help to remove any standing water in the bowl.
It is important to remove the toilet tank lid before plunging or using a baking soda and vinegar solution to unclog the toilet. This is to ensure that all of the standing water inside the tank is drained, as any left-over water can hinder the unclogging process.
In order to remove the tank lid, you will need to unscrew the screws located around the perimeter of the lid. Be sure to put the screws in a secure place like a bowl while they are removed. Once the screws are out, you can then take off the lid. Before attempting to lift the lid, tilt it backwards to drain any additional water that may have accumulated in the tank.
Then, take a bucket and place it underneath the tank to collect any water that may remain in the tank. After this is done, you may flush the toilet to drain out any remaining water in the bowl. Once drained, you will be ready to start the unclogging process.
3. Once the water is gone, you can begin to try to unclog the toilet. One way to do this is to use a plunger
Once the water is gone, you can begin to try to unclog the toilet. One way to do this is to use a plunger. To properly use the plunger, make sure it is completely submerged in the toilet. Then, use quick and hard pulls to help loosen and move whatever is clogging the toilet. Doing this a few times should be sufficient to unclog the toilet.
If you do not have a plunger, using a mixture of baking soda and vinegar can also be effective. After mixing one cup of baking soda with two cups of vinegar, pour the solution down the toilet and let it sit for at least 15 minutes. Then, flush the toilet and see if the clog has been cleared.
If the clog persists, you may need to use a plumbing auger or snake. These tools are designed to drill through and remove the clog. If you are uncomfortable using a plumbing auger or snake, it is best to contact a professional plumber in Salt Lake City, Utah to complete the job.
